Electro-Optical and Thermophysical Characterization of Poly (Tripropylene Glycol Di-Acrylate)/Liquid Crystal Composite Materials Prepared by Polymerization Induced Phase Separation

Abstract

This work examines the development and characterization of tripropylene glycol di-acrylate/liquid crystal E7 (TPGDA/LC E7) PDLCs composite materials (polymer-dispersed-liquid-crystals). These systems were produced by UV irradiation photopolymerization (PIPS) of a mixture of the monomer tripropylene glycol di-acrylate (TPGDA) and the liquid crystal E7 (LC E7, a mixture of three cyano-biphenyl and one cyano-terphenyl LCs), in the presence of 2?wt% (of the acrylate/E7 mixture) of a photoinitiator. Electro-optical, thermal and optical characterization was used to understand the effect of the LC concentration on the electro-optical and thermo-physical properties of these materials. Polarizing optical microscopy (POM) and differential scanning calorimetry (DSC) studies were performed to observe the system morphology and to determine the transition temperatures of these materials, both as a function of their composition. The findings showed a slight variation of the nematic-isotropic transition temperature, T_NI, of the LC E7 and of the glass transition temperature, T_g, of the TPGDA polymeric matrix as a function of the mass percentage of the LC E7. A very good electro-optical response for the composition 30/70?wt % TPGDA/LC E7 was obtained.     

惯性辅助电光测距技术研究与误差分析

将目标物上的某一点在两幅图像上的对应点之间的灰度值和坐标值进行比较，结合惯性导航系统的输出信号，可得到运载体与目标物间的距离。对惯性辅助电光测距方法进行了理论分析、测距仿真及误差分析。仿真结果与真实值之间的误差小于5%，表明了该算法的可行性和整个设计的可用性。     

A field-reversal method for measuring the parameters of a ferroelectric liquid crystal

A method for measuring the spontaneous polarization P _s, the switching time, the rotational viscosity γ_φ, and the d.c. conductivity σ is presented. The possibilities of estimating the azimuthal angle φ₀, the dielectric anisotropy δε and the dielectric permittivity ε_⊥ in the same experiment are also discussed. It is explicitly shown that the switching delay, though primarily dependent on the material and the applied field, is also dependent on the geometry of the cell.     

Effect of graft polymer prepared by living radical polymerisation on electro-optical properties of polymer dispersed liquid crystal

In this study, a graft polymer matrix prepared by living radical polymerisation had been incorporated into polymer dispersed liquid crystals (PDLCs). The electro-optical properties of the PDLCs were investigated. The results showed that the length and density of graft chain had a great influence on the memory effect of the PDLCs. Low-driving-voltage and weak-memory-effect PDLCs could easily be obtained with a graft polymer matrix.     

Novel sulphur-containing banana-shaped liquid crystal molecules

In this preliminary report we present the mesomorphic properties and electro-optic investigations of three new 'banana-shaped' mesogens. The materials are structurally similar to Niori's the original bent-core materials but possess alkylthio substituents in place of alkoxy substituents. Microscopic investigations revealed an unusual 'spiral-domain texture', similar to that observed in the 'B₇' phase of related materials. Further investigations support our earlier observations that the materials display antiferroelectric switching in this phase, in two of the new materials studied. The nature of this phase, in comparison with the 'switchable' (B₂) and 'chiral-domain' (B₄) phases of the original materials, is discussed.     

CdSe quantum dot-dispersed DOBAMBC: an electro-optical study

Cadmium selenide quantum dot (CdSe QD) has been used as a dopant in ferroelectric liquid crystal (FLC) 2-methylbutyl 4-(4-decyloxybenzylideneamino) cinnamate (DOBAMBC). Effect of CdSe QD in DOBAMBC on its different electro-optical (E-O) properties has been studied in the SmC* phase. The optical micrographs recorded for the pure and composite material are showing good dispersion of QDs in the FLC matrix. Micrographs of unaligned sample cell revealed that CdSe QDs induce homeotropic alignment of FLC molecules. An appreciable change in the value of E-O parameters like tilt angle, spontaneous polarisation and response time with shifting of SmA–SmC* phase transition temperature has been observed for CdSe QD–DOBAMBC composite. The observed properties of composite system have been discussed on the basis of surface properties of QDs in FLC system.     

Cyano terminated tolane compounds for polymer dispersed liquid crystal application: relationship between cyano terminated tolane based molecular structures and electro-optical properties

ABSTRACT

The structures of the liquid crystal (LC) molecules have a key role in impacting the electro-optical performance of a polymer dispersed liquid crystal (PDLC) film. In this paper, the relationship between the LC molecular structures and the electro-optical properties of PDLC films is investigated based on an unexplored cyano-terminated tolane compounds (CTTCs) doped E8 LCs/UV polymers system. Due to the high polarity of CTTCs, LCs doped with the cyano-terminated tolane (CTT) molecules exhibit high birefringence and large positive dielectric anisotropy. On the whole, PDLC films doped with the CTT molecules exhibit a lower driving voltage than that doped with the pure E8. More excitingly, PDLC films based on CTT molecules with larger length-to-width ratio and longer conjugated system show higher contrast ratio (CR) and faster response time. Eventually, the mechanism of the effects of CTT-based molecular structures and the relationship between the electro-optical performance of PDLC films and CTT molecules are illustrated. This work paves a new way for optimising the electro-optical properties of PDLC films.     

Effect of rGO on polymer-dispersed liquid crystal fabricated by RAFT polymerisation

In this study, we demonstrated that doping polymer matrix with a small amount of reduced graphene oxide (rGO) component (0.05–0.2%) had significant influence on the polymerisation kinetics and electro-optical performances of polymer-dispersed liquid crystal films (PDLCs) fabricated with macro reversible addition-fragmentation chain transfer agents. The effects of rGO content were studied in terms of morphology, compound viscosity, polymer conductivity, polymerisation kinetics and driving voltage of PDLCs. The results exhibited that higher rGO content increased the compound viscosity and the entire process proceeded slowly. Furthermore, the addition of rGO increased the polymer conductivity and local electric field, and reduced the saturation voltage as well as the threshold voltage from 27.3 to 19.5 V and 13.2 to 6.41 V, respectively.     

Effects of monomer structure on the morphology of polymer networks and the electro-optical properties of polymer-dispersed liquid crystal films

Polymer-dispersed liquid crystal (PDLC) films were prepared by photochemical polymerisation with a series of (meth)acrylate monomers. The effects of monomer structure on the morphology of polymer networks in the PDLC films were studied. The acrylate monomers without sidegroup chain formed uniform polymer networks. The methacrylate monomers with methyl as their sidegroup chains formed lace-like networks. The size of the LC droplets increased with increasing the length of the flexible chain of both methacrylate and acrylate monomers. Meanwhile, the effects of the morphology of the polymer network on the electro-optical properties of PDLC films were also investigated.     

两轴光电跟踪仪高仰角跟踪盲区分析

 从轴准直误差、动态滞后误差两方面分析了采用俯仰轴叠加于方位轴光机座结构方式的光电跟踪仪在高俯仰角跟踪时的误差变化及由此导致的盲区问题,从轴准直误差和动态滞后误差两方面对高仰角跟踪盲区的形成及其空间分布进行分析,并用MATLAB进行了仿真,给出跟踪盲区随方位、俯仰角变化的的分布图形。从盲区分布图形可以看出：光电跟踪仪在性能一定的情况下,跟踪盲区随着仰角增大而增大,并结合直线航路给出这两种误差导致的跟踪盲区的计算方法。跟踪直线航路实验数据显示跟踪误差随着仰角增大而增大。